Key Features
Cleaner 90 Degree Cuts This zero-clearance insert tightens the gap around the blade so the workpiece is supported closer to the cut. That helps reduce tear-out and wood damage when you are making precise 90 degree cuts. Built for GTS15-10 The Bosch TS1017 Zero-Clearance Insert for GTS15-10 is made specifically for the Bosch GTS15-10 10 inch worksite table saw. That matters because fit is what makes a table saw insert work right. Simple Upgrade You get a genuine Bosch plastic insert that swaps in as a direct accessory. It is an easy way to improve cut quality without changing the saw or adding a more complicated setup.
Overview
The Bosch TS1017 Zero-Clearance Insert for GTS15-10 is a table saw insert designed for cleaner, more controlled cuts on the Bosch GTS15-10 10 inch worksite table saw. This is a table saw zero-clearance insert designed for reducing tear-out and supporting the workpiece closer to the blade. Model number: TS1017. If you want better edge quality from your table saw without overcomplicating the setup, this is the accessory that handles that job.
What makes a zero-clearance insert worth buying is simple: the stock opening around the blade leaves more unsupported material at the cut line. The TS1017 reduces that kerf clearance down to the thickness of the blade at 90 degrees, which helps minimize tear-out that can happen with a standard insert. On plywood, trim stock, and other material where chip-out shows, that closer support can make a noticeable difference.
This Bosch insert is built specifically for the GTS15-10, not as a one-size-fits-most accessory. That product-specific fit matters because a table saw insert needs to sit correctly in the saw to support the workpiece properly. Bosch calls it a genuine attachment for the GTS15-10, so this is the right choice for owners of that saw who want a direct-fit replacement or upgrade.
The construction is plastic, which keeps weight down at just 0.39 lb while still giving you the shape and surface you need for table support. Overall size is 13.7 inches long, 4.1 inches wide, and 0.5 inch high. Those dimensions matter because table saw accessories are all about fit and clearance, not just material or brand name.
In practical use, this accessory is about cut quality and control more than speed or power. It helps support material closer to the blade, which is especially useful when you are trying to make clean 90 degree cuts and keep the bottom face or edge from breaking out. For trim work, finish carpentry, cabinetry, and general shop work where a cleaner cut saves sanding or rework, that is time well spent.
If you already run a Bosch GTS15-10 on the jobsite or in the shop, the Bosch TS1017 Zero-Clearance Insert for GTS15-10 is a smart add-on. It is best for woodworkers, trim carpenters, remodelers, and serious DIY users who care about cut finish and want a table saw accessory that is made for their exact saw instead of a generic substitute.
Cut With Less Tear-Out
A good zero-clearance insert does one thing really well: it gives the material more support right where the blade exits the table. That extra support helps produce cleaner table saw cuts and better control, especially when surface finish matters.
- Designed to reduce kerf clearance to the thickness of the blade at 90 degrees
- Helps minimize tear-out and reduce wood damage compared to a standard insert
What’s in the Box
- (1) TS1017 Zero-Clearance Insert for Table Saw
Key Specifications
| Material |
Plastic |
| Overall Length (in) |
13.7 in |
| Width (in) |
4.1 in |
| Height (in) |
0.5 in |
| Weight (lbs) |
0.39 lbs |
| Accessory Type |
Zero-clearance insert |
Compatibility
Tool Compatibility Designed exclusively for the Bosch GTS15-10 10 inch worksite table saw. Cutting Setup Made to create zero-clearance support for 90 degree cutting applications on the GTS15-10.
Built For
Woodworking Carpentry Remodeling Finish Work Clean Crosscuts Reduced Tear-Out
Pro Tip
Use the TS1017 when you are making finish-sensitive 90 degree cuts where the bottom face of the material needs better support. It is a small accessory, but it can save cleanup time by cutting down on chip-out right at the blade opening.
Warranty & Support
1 year limited warranty.
Tool Nut’s Take
Tool Nut’s Take
Small Upgrade, Better Table Saw Results
The Bosch TS1017 Zero-Clearance Insert for GTS15-10 is the kind of accessory that makes sense the minute you care about cut quality instead of just getting through the board.
- Who it’s for: GTS15-10 owners who want cleaner 90 degree cuts for trim, cabinet parts, plywood, and general woodworking.
- Why it stands out: It is a genuine Bosch insert built specifically for the GTS15-10, and the zero-clearance design helps support material closer to the blade to reduce tear-out.
- Worth knowing: This is a saw-specific accessory, so the value is all in the fit. If you do not own the Bosch GTS15-10, this is not the insert to buy.
Common Questions
- What saw does this insert fit? It is designed for the Bosch GTS15-10 10 inch worksite table saw.
- What does a zero-clearance insert do? It supports the workpiece closer to the blade, which helps minimize tear-out and reduce wood damage during 90 degree cuts.
- What is the insert made from? The TS1017 is made from plastic.
- How big is it? It measures 13.7 inches long, 4.1 inches wide, and 0.5 inch high.
